Products

Solutions for Interior Window Coverings & Roller Shutters

SONESSE 40 WT SONESSE 40 RTS

Main Characteristics and Features

  • 230V / 50Hz tubular motor.
  • The Sonesse 40 has been adapted to be a quiet roller blind motor. Sonesse 40 is available in two control options: Wired Technology and Radio Technology Somfy (RTS), and are equally available in 3Nm, 6Nm and 9Nm.
  • Progressive limit switch setting and remote set limits.
  • 40 turn limit capacity for WT range.
  • 250 turn limit capacity for RTS range.
  • Memory capacity: 12 channels plus 3 wireless sensors for RTS range.
  • Modulis compatible.
  • RTS transmission range: 20m between 2 reinforced concrete walls.
  • Programmable ‘my’ position.
  • Requires the use of a crown and wheel for tube adaptation.
  • Horizontal mount only. Intermittent usage.
SONESSE 50 PA SONESSE 50 ILT2

Main Characteristics and Features

  • 230V / 50Hz tubular motor.
  • The Sonesse 50 has been adapted to be a quiet† roller blind motor. Available in 3Nm, coupled with its flexible 48mm design, it is adapted for Ø50mm tubes and above.
  • Rapid set push button or progressive limits (PA) and the adaptability of 230V control make the Sonesse 50 a quick, quiet performer for installations that require a minimal level of noise. Rapid set or progressive limits.
  • 46 turn limit capacity (29 for Sonesse 50 PA).
  • Suitable for tubes: Ø50 to Ø65.
  • 230V switch control via electronic or mechanical means*.
  • Requires the use of a crown and wheel for tube adaptation.
  • Horizontal mount only.
  • Intermittent usage.

 

SONESSE 50 RTS

Main Characteristics and Features

  • 230V / 50Hz tubular motor.
  • The Sonesse 50 RTS has been adapted to be a quiet* roller blind motor. Available in 3Nm, coupled with its flexible 48mm design, it is adapted for Ø50mm tubes and above. Available in the traditional starhead style to allow for extra fabric drifting, a built-in radio receiver with Somfy’s rolling code and the installation flexibility of remote control make the Sonesse 50 RTS a quick and quiet performer for installations that require a minimal level of noise.
  • Remote set limits.
  • Turning capacity limited only by thermal time. Suitable for tubes: Ø50 to Ø65.
  • Memory capacity: 12 channels / transmitters, plus 3 sensors.
  • Programmable “my” position. Requires the use of a crown and wheel for tube adaptation.
  • Horizontal mount only.
  • Intermittent usage.

ALTUS 50 RTS*

Main Characteristics and Features

  • 230V / 50Hz tubular motor.
  • The Altus 50 RTS is suitable for a wide range of roller blind application types. Available in torques from 6Nm to 15Nm, coupled with its flexible 48mm design, it is adapted for Ø50mm tubes and above. Available in the traditional star head style to allow for extra fabric drifting, a built-in radio receiver with Somfy’s rolling code and the installation flexibility of remote control make the Altus 50 RTS a suitable all round performer.
  • Remote set limits.
  • Turning capacity limited only by thermal time.
  • Suitable for tubes: Ø50 to Ø65.
  • Memory capacity: 12 channels / transmitters, plus 3 sensors.
  • Programmable “my” position.
  • Requires the use of a crown and wheel for tube adaptation.
  • To be installed horizontally
  • Horizontal mount only.
  • Intermittent usage.

LT 50*

Main Characteristics and Features

  • 230V / 50Hz tubular motor.
  • The LT 50 is suitable for a wide range of roller blind application types. Available in torques from 6Nm to 15Nm, coupled with its flexible 48mm design, it is adapted for Ø50mm tubes and above. Available in the traditional star head style to allow for fabric drift. Rapid set push button limits and the adaptability of 230V control make the LT 50 a suitable all round performer.
  • Rapid set limits.
  • 46 turn limit capacity.
  • Suitable for tubes: Ø50 to Ø65.
  • 230V switch control via electronic or mechanical means*.
  • Requires the use of a crown and wheel for tube adaptation.
  • Horizontal mount only.
  • Intermittent usage.

ILT2 50

Main Characteristics and Features

  • 230V / 50Hz tubular motor.
  • ILT2 can be used for both interior and exterior applications due to its wide performing motor range compatibility with 50mm standard accessories. For interior applications, silent and high speed versions are available to motorise applications such as roller blinds, roman blinds, projection screens. ILT2 motors with higher torque allow lifting of several shades bands together simultaneously, therefore reducing installation cost. The embedded encoder guarantees a highly accurate position management (+/- 2º) angular rotation, equivalent to +/- 4mm linear motion with a 50mm tube. It also enables up to 16 favourite stored positions that can be easily recalled by one simple command action. Limit settings are also made easier as no manual action on the motor itself is required.
  • Bi-directional data communication.
  • High accuracy of motor position.
  • Unlimited number of intermediate positions.
  • Easy remote limits setting.
  • Several high speed versions.
  • Control flexibility.
  • Available in ultra-quiet version (Sonesse).

CLS 50

Main Characteristics and Features

  • The CLS 50 system is designed to suit integration of any 50mm WT and RTS tubular motor. Giving the flexibility where higher torque and speed motors can be used in cord-lift applications. The CLS 50 system is developed with aluminium head rail and tube (lesser “head rail twisting”) making it much durable than the old system (made of thin metal steel). The CLS 50’s special cone system also allows lifting cord to be coiled uniformly, successfully eliminates overlapped coiling from appearing; which may create an imbalance lifting effect.
  • Maximum system length (single headrail) of up to 6m.
  • Intermediate component allow longer system length of more than 6m*.
  • Maximum retractable height at 4.8m.
  • Suitable for all cord lift application: Roman blinds, Balloon shades, Austrian blinds, Venetian blinds and, etc.
  • Horizontal mount only.
LT 28

Main Characteristics and Features  

  • 24V DC tubular motor.
  • The LT 28 is a Safety Extra Low Voltage (SELV) 24V DC tubular motor. With a torque of 0.7Nm, it is adapted for Ø28mm tubes. Fitted with rapid set limits and the advantage of not requiring an electrician to install due to the utilisation of 24V DC SELV, the LT 28 is a versatile tubular motor for small installations.
  • Rapid set limits.
  • 40 turn limit capacity.
  • Suitable for tubes: Ø28.
  • 24V switch control via electronic or mechanical means.
  • Supplied with a crown and wheel for tube adaptation.
  • Horizontal mount only.
  • Intermittent usage.
previous arrow
next arrow
ArrowArrow
Slider

ALZOE PTE LTD


Blk 5 Ang Mo Kio Industrial,
Park 2A #02-14 AMK Tech II,
Singapore 567760

Tel: +65 6841 4711
Fax:+65 6841 4911

Email: sales@alzoe.com

NEWSLETTER


Join our mailing list for Updated news and promotions


© Copyrights ALZOE PTE LTD 2017. All Rights ReservedWeb Design by Firstcom Solutions