Products

Sky Tech Solar / Morocco Solar

Sky Tech & Louver System – Introduction of Products

Sky Tech - Blockout Skylight System

Using Acmeda’s blockout channels, the Channel Skylight is a simple system to install in a variety of skylight window applications.
With the same options available in the z-lock skylight, the system hides all mechanisms inside minimalistic square head boxes leaving a clean, unobtrusive finished blind.

Features/Benefits
Contemporary square box design.
Constant tension from controls minimising sagging in one direction.
Blockout channels assist in keeping weight bar in line during operation.
Assists in energy saving, heat and noise insulation.
Side guide brushes allow the system to glide silently.
Optional tensioning configurations.

COMPONENT

  1. Box 120 | Back, Front, Cover
  2. Box 120 | End Plates & Covers
  3. M50 Star Head Motor Adapter
  4. M50 Motor
  5. M50 Crown Wheel
  6. M50 Drive Wheel
  7. SYS60 | 80HD Tube
  8. RB10 Tube Adapter
  9. RB10 Idler Booster Head
  10. RB10 Idler Booster Head Bracket
  11. Blockout 17 Side Guide
  12. W9 Weight Bar End Caps
  13. W9 Weight Bar
  14. Wire Drum
  15. Wire Rope
  16. S60 | 60STD Tube
Louver System – Feature

  1. Louver Controls the Sunlight & Wind by Motorized System
  2. Made by Glass, Wood & Various Materials
  3. To Shut out the Sunlight & Moisture but go through Air & Light
  1. Possibly Fixed Type & Moving Type
  2. Motor Box
  3. 360°
  4. Lifting / Sliding

When Strong Wind Blows
In addition to normal operation:

  • Each slat can be rotated individually & manually to some degree.
  • To avoid being damaged by an external force, every slat have a free rotate range.
  • In case the slats are rotated unintentionally by strong wind, they revert to normal position by remote controller.

COMPONENT

  1. Lift Gear System – I
  2. Weight
  3. Tilt Gear System 4
  4. Guide Rail End
  5. Slat & Gear Connector (Coupling)
  6. Motor Box
  7. Motor
  8. Hexagonal Bar
  9. Lift Gear System – II
  10. Motor Box Cover
  11. Lift Gear System – I
  12. Motor Box
  13. Slats
  14. Guide Rail End
  15. Guide Rail Track
Sky Tech – New Technology & Various Applications

OLD F.T.S AND SKY TECH

  1. No gap(chink) between closed fabrics – efficient sunshading
  2. Free from derailing & Front-Bar Leaning – product reliability
  3. A definite space of Pulley(maximize space utilization) – Old F.T.S need a space for tow-wires
  4. Economical System – operated by single motor to sustain fabric’s tension
  5. No need complicated wiring(simple installation) – enjoy lower labour cost

Sky Tech – Composition

Features

  • To use for Skylight (horizontal), Sunken (slope), Atrium; Applied product of Roll Screen.
  • To save energy, to shut out UV rays & beautify the architecture.
  • To apply on all structure systems.

COMPONENT

  1. Motor Cover
  2.  Motor
  3.  Guide Rail (Pressure System)
  4. Front Bar
  5. Motor Tube
  6.  Plug End
  7.  Plug End Bracket
  8. Motor Bracket
  9. Guide Cap
  10. Fabric
  11. Guide Bracket
  12. Wall Switch
  13. Easy Installation
  14. Tension System
  15. Motor & Shaft
  16. Guide Bar
  17. Tension Guide Rail
  18. Master Carrier
  19. Cylinder & Inner Rail
  20. Traction Bar

Sky Tech – ROLLBOX 885

Roller System for Skylights with Box and Side Guides for Dimming and Filtering Use

System specifically recommended for raked and horizontal skylights.

Rollbox 885/3

  • Gear operation: 160cm width max – 160cm height max.

Rollbox 885/4

  • Motor operation: 160cm width max – 300cm height max.
  • The comparable tension on both ends of the fabric is guaranteed by a double spring traction system.
  • Vertical, horizontal and sloping built-in or wall installation.
  • The aluminium side guides are available in a width of 80mm.
  • Surface finish: Aluminium boxes and base RAL 9016 white, RAL 9005 black; silver anodised – bronze anodised.
  • Accessories: grey – white – black – brown.



Specifications

  • 6060 T6 UNI 8278 aluminium alloy box.
  • Size: 85 x 97.2mm.
  • 36-50mm ø6060 T6 UNI 8278 aluminium alloy winding tube.
  • 80mm 6060 T6 UNI 8278 aluminium alloy side guides.
  • Operating:

Rollbox 885/3
Gear operation with detachable articulated rod.

Rollbox 885/4
230 Vac – 50Hz motor operation with button control or radio frequency remote control.

  • Surface finish: Aluminium box and base RAL 9016 white, RAL 9005 black; silver anodised – bronze anodised.
  • Accessories: grey – white – black – brown.
previous arrow
next arrow
ArrowArrow
Slider

ALZOE PTE LTD


Blk 5 Ang Mo Kio Industrial,
Park 2A #02-14 AMK Tech II,
Singapore 567760

Tel: +65 6841 4711
Fax:+65 6841 4911

Email: sales@alzoe.com

NEWSLETTER


Join our mailing list for Updated news and promotions


© Copyrights ALZOE PTE LTD 2017. All Rights ReservedWeb Design by Firstcom Solutions